Benefits:
☑️ NLGI GC-LB
☑️ Polyurea #2 grease
☑️ Excels in high temperature, heavy load and dry conditions
☑️ Used most often for sealed bearing sets, electric motor bearings, and indoor industrial equipment
☑️ Does not mix well with other grease types, like aluminum, lithium and lithium complex.
BG SS 2000 is a truly unique, multi-purpose grease which represents the most advanced technology in grease lubrication. It performs exceptionally well in automotive, marine and industrial environments, in hot or cold temperatures, under wet ot dry conditions, and with light or heavy loads. BG SS 2000 will mix with virtually any other soap-based grease. Seal compatibility is excellent in a wide variety of materials such as Hytrel®, Viton® and Neoprene. Approved by National Lubricating Grease Insitute for automotive service classifications GC-LB. Hytrel® and Viton® are registered trademarksof Dupont Dow Elastomers.
Part Number: PN608M
Quantity: 14 oz. (397 g) cartridge
| Test | ASTM Test Method | Typical Test Results |
|---|---|---|
| Worked Penetration, 60 Strokes | D217 | 265–295 |
| Water Washout, % loss | D1264 | 5 max. |
| Dropping Point | D2265 | >260°C (>500°F) |
| Oil Separation, % loss | D1742 | 10 max. |
| Four Ball EP, Weld Point, Kgf | D2596 | 400 min. |
| Four Ball Wear, mm scar | D2266 | 0.6 max. |
| Rust Prevention | D1743 | Pass |
| Timken, OK Load, lb. | D2509 | 60 min. |
| Low Temperature Torque, –40°C, NM | D4693 | 10 max. |
Use in accordance with equipment manufacturer’s recommendations.
FOR PROFESSIONAL USE.
BG Products, Inc., accepts no liability for excessive use or misuse of this product.
Product Data Sheets
