Benefits:
☑️ Removes and replaces 100% the old & oxidized brake fluid with new brake fluid
☑️ Keeps vehicle’s brake operation safe, ABS system or Hybrid vehicles
☑️ Increases the efficiency of brake system
☑️ Helps prevent costly break down and prolongs the life of the brake hydraulic system
☑️ Flushes and bleeds the brake system in 10 minutes
Formulated to meet or exceed the quality requirements of Domestic and European automobile manufaturers, this synthetic DOT 5.1 brake fluid goes beyond the specification of regular DOT 4 to provide the ultimate in high temperature, high boiling point protection for all disc and drum brake systems. BG DOT 5.1 compatible across all Gasoline, Diesel, Hybrid, and Electric vehicles with its unique ultra-low conductivity and ultra-dry synthetic formula for optimal braking performance.
Part Number : 83532M
Quantity : 946 mL
| Test | ISO** 4925 Specifications | FMVSS* 116 Specifications | BG DOT 5.1 Brake Fluid |
|---|---|---|---|
| Equilibrium Reflux Boiling Point, min. | 260°C (500°F) | 260°C (500°F) | 278°C (532°F) |
| Wet Equilibrium Reflux Boiling Point, min. | 180°C (356°F) | 180°C (356°F) | 182°C (360°F) |
| Kinematic Viscosity, at –40°C (–40°F), cSt max. | 900 | 900 | 854 |
| Kinematic Viscosity, at 100°C (212°F), cSt | 1.5 min | 1.5 min | 2.3 |
| pH | 7–11.5 | 7–11.5 | 7.1 |
| Corrosion Weight Change, mg/cm³, max. |
Tinned Iron: 0.2 Steel: 0.1 Aluminum: 0.2 Cast Iron: 0.4 Brass: 0.4 Copper: 0.2 |
Tinned Iron: 0.2 Steel: 0.1 Aluminum: 0.2 Cast Iron: 0.4 Brass: 0.4 Copper: 0.2 |
Tinned Iron: 0.02 Steel: 0.00 Aluminum: 0.01 Cast Iron: 0.05 Brass: 0.06 Copper: 0.01 |
*U.S. Federal Motor Vehicle Safety Standard 116
**International Standards Organization (ISO)
Clean all dirt from around the cover on the master cylinder before removing. Fill the unit to the level specified by the manufacturer. Replace the cover. Check the fluid level once a month.
To bleed the system, refer to the service manual. Do not reuse brake fluid from the bleeding operation.
CAUTION: Never wash cylinders or parts with gasoline, kerosene, or oil. Avoid spilling fluid on car finish or brake lining.
FOR PROFESSIONAL USE.
BG Products, Inc., accepts no liability for excessive use or misuse of this product.
Product Data Sheets
